Filter
Top Products
202 16 Troubleshooting network problems EN
Domain Name The Domain Name System (DNS) name of the domain in which the print
server resides (for example, support.company.com). It is not the fully
qualified DNS name because the host printer name is not included (for
example: printer1.support.company.com).
● Not Specified a domain name has not been configured on the
print server.
DNS Server The IP address of the Domain Name System (DNS) server.
● Not Specified a DNS server's IP address has not been configured
on the print server.
WINS Server The IP address of the Windows Internet Name Service (WINS) server.
● Not Specified a WINS server's IP address has not been
configured on the print server.
Syslog Server The IP address of the syslog server configured on the print server.
● Not Specified a syslog server has not been configured.
Idle Timeout The timeout value expressed in seconds after which the print server closes
an idle TCP print data connection. Acceptable values are integers between
0 and 3600 seconds. A value of zero turns off the timeout mechanism. The
default value is 270 seconds.
SLP Specifies whether the print server sends Service Location Protocol (SLP)
packets used by system applications for automated installation.
● Enabled the print server sends SLP packets.
● Disabled the print server does not send SLP packets.
Access List Identifies whether a host access control list is configured on the print
server. A host access control list specifies the IP address of individual
systems, or IP network of systems, that are allowed access to the print
server and device.
● Specified a host access list is configured on the print server.
● Not Specified a host access list is not configured on the print
server. All systems are allowed access.
Web JetAdmin URL If the print server is found on the network by HP Web JetAdmin, the URL of
the host system used for HP Web JetAdmin services is displayed. The URL
is limited to two lines and may be truncated.
● Not Specified the URL of the HP Web JetAdmin host system could
not be identified or is not configured.
Message Description