Hitachi 3300MFP Printer User Manual


 
80 7 Faxing EN
Changing the V.34 setting
Managing fax logs and reports
Printing the fax activity log
Setting the fax activity log to print automatically
Printing a fax call report
Setting fax call report print times
Including the first page of each fax on the fax call report
Printing a phone book report
Printing the billing codes report
Printing a T.30 protocol trace report
Printing the block fax list
Printing all fax reports
Setting the information in the fax header
To set the fax header
To set or change the fax header information, use the following steps. If you need help entering any
information, see Using dialing characters
.
1 On the control panel, press menu/enter.
2 Using the < and > buttons, select Time/Date, Header and press menu/enter.
3 Using the < and > buttons, select Fax Header, and press menu/enter.
4 Using the alphanumeric keypad, enter your fax number and press menu/enter.
5 Using the alphanumeric keypad, add the name of your company and press menu/enter.
Setting the answer mode
Depending on your situation, you can set the HP LaserJet 3330s answer mode to automatic or
manual.
Automatic: In automatic answer mode, the product answers incoming calls after a specified
number of rings or upon recognition of special fax tones. To specify the number of rings, see
Changing rings-to-answer
.
Manual: In manual answer mode, the product never answers calls. You must start the
fax-receiving process yourself, either by pressing start fax on the control panel or by picking
up a phone connected to that line and dialing 1-2-3.
The default answer mode is automatic.
Note Although most users leave the answer mode set to automatic, voice callers who dial the fax phone
number will hear fax tones if the phone is not answered, or if they do not hang up by the specified
number of rings-to-answer. If you do not want voice callers to hear fax tones, use the manual setting,
but remember that fax calls are not received automatically.
To set the answer mode
To set or change the answer mode, use the following steps:
1 On the control panel, press menu/enter.