Filter
Top Products
208 16 Troubleshooting network problems EN
1C
PRINT SERVER NO
DEFINED
The file server does not have a print server object that corresponds to the
specified NetWare node name. Use printer installation software, a NetWare
utility (such as PCONSOLE), or another tool to create the print server
object.
Note: When the print server is configured for multiple file servers, the error
is only displayed on the configuration page if none of the file servers was
successfully connected.
1D
UNABLE TO CONNECT TO
SERVER
Remote Printer mode error. The print server was unable to establish an
SPX connection with the NetWare print server. Make sure that the NetWare
print server is running and that all cables and routers are functioning
correctly.
1E
FAIL RESERVING PRINTER
NUM
The SPX connection to the print server was lost when the print server
attempted to reserve the printer number. This indicates a possible network
problem, or a problem with the print server. Make sure all cables and
routers are functioning correctly. Try restarting the print server.
1F
ERR NEGOTIATING BUFFER
SIZE
A failure was detected when selecting the buffer size to be used when
reading print data from the file server. This may indicate a network problem.
Note: When the print server is configured for multiple file servers, the error
is only displayed on the configuration page if none of the file servers was
successfully connected.
20
UNABLE TO LOGIN
A failure was detected when the print server tried to log onto the file server.
This could be caused by the print server object not existing on the file
server, or by a security check that prevents the print server from logging in.
Make sure the file server name and print server object name are correct.
Use PCONSOLE to erase the password for the print server object. Create a
new print server object.
Note: When the print server is configured for multiple file servers, the error
is only displayed on the configuration page if none of the file servers was
successfully connected.
21
UNABLE TO SET PASSWORD
A failure was detected when the print server tried to set the password for
the print server object. (Whenever the print server is able to log in without a
password, it sets the password automatically.) This indicates a networking
or security problem. Create a new print server object.
Note: When the print server is configured for multiple file servers, the error
is only displayed on the configuration page if none of the file servers was
successfully connected.
22
UNABLE TO CONNECT TO
SERVER
Queue Server mode error. The print server could not establish an NCP
connection to the file server. Make sure that the correct file servers are
connected.
Note: When the print server is configured for multiple file servers, the error
is only displayed on the configuration page if none of the file servers was
successfully connected.
Error Code and Message Description