228 Appendix A Specifications and regulatory information EN
Declaration of Conformity
The following Declaration of Conformity complies with ISO/IEC Guide 22 and EN45014. It
identifies the product, manufacturer’s name and address, and applicable specifications recognized
in the European community.
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturer's Name: Hewlett-Packard Company
Manufacturer's Address: 11311 Chinden Boulevard
Boise, Idaho 83714-1021 USA
declares that the product
Product Name: LaserJet 3300/3310/3320/3330 Series
Model Number: C9124A, C9125A, C9126A, C9151A, C9709A
(including Model C9143A ADF Accessory)
Product Options: ALL
conforms to the following Product Specifications:
Safety: IEC 60950:1991+A1:1992+A2:1993+A3:1995+A4:1996 /
EN 60950:1992+A1:1993 + A2:1993 + A3:1995 + A4:1997 + A11:1997
IEC 60825-1:1993 + A1:1997/
EN 60825-1:1994 + A11:1996 Class 1 Laser/LED Product
EMC:
CISPR 22:1993 + A1:1995 + A2:1996 /
EN 55022:1994 + A1:1995 + A2:1997 Class B
1)
EN 61000-3-2:1995+A14:2000
EN 61000-3-3:1995
EN55024:1998
FCC Title 47 CFR, Part 15 Class B
2)
/ ICES-002, Issue 2
AS / NZS 3548:1995 + A1 + A2:1997
TELECOM
3)
TBR-21:1998; EG 201 121:1998
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive
89/336/EEC and carries the CE-marking accordingly.
3)
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
3) LaserJet 3330 (Model C9126A) contains fax functionality and is therefore compliant with the referenced telecom
standards and the R&TTE Directive 1999/5/EC (Annex II) and carries the CE-marking accordingly.
Boise, Idaho USA
August 14, 2001
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130,
Australia.
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh, Department HQ-TRE /
Standards Europe, Herrenberger Strasse 130, D-71034 Böblingen (FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015
(Phone: 208-396-6000)