Hitachi 3300MFP Printer User Manual


 
EN Verifying your work 33
Verifying your work
After setting up the product, verify your work by testing your HP LaserJet 3300 products printing
and copying functions.
To self-test the printer
To test the printer, use the following steps:
1 On the products control panel, press menu/enter.
2 Use the < and > buttons to select Reports and press menu/enter.
3 Use the < and > buttons to select Config Report and press menu/enter.
A configuration page prints, showing the products current configuration and the control panel
display returns to Ready. If the page does not print successfully, see Troubleshooting printing
problems.
To self-test the copier using the ADF input tray
Use the configuration page you just printed to test the copier.
1 Adjust the guides on the ADF input tray to the size of the configuration page.
2 Place the configuration page into the ADF input tray top first, print side up. Verify that the
control panel display reads Document Loaded.
3 On the products control panel, press start/copy.
The product makes a copy of the configuration page and the control panel display returns to
Ready. If the page does not copy successfully, see Troubleshooting copy problems
.
1
2