100 7 Faxing EN
To turn the redial on busy option on or off
The product is set to redial busy numbers five times automatically.
1 Press menu/enter.
2 Use the < or > button to select Fax Setup and press menu/enter.
3 Use the < or > button to select Fax Send Setup and press menu/enter.
4 Use the < or > button to select Redial On Busy and press menu/enter.
5 Use the < or > button to select On or Off and press menu/enter.
To turn the redial on no answer on or off
If this option is turned on, the product is set to redial on no answer one time automatically in the
U.S. and Canada, and two times automatically for all other countries/regions.
1 Press menu/enter.
2 Use the < or > button to select Fax Setup and press menu/enter.
3 Use the < or > button to select Fax Send Setup and press menu/enter.
4 Use the < or > button to select Redial-No Answer and press menu/enter.
5 Use the < or > button to select On or Off and press menu/enter.
Using billing codes
If the billing codes feature has been turned on, the user will be asked to input a billing code for
each fax. The billing number will be credited for each fax page that is sent. This includes all types
of faxes except for poll receive, fax forwarding, or PC downloaded faxes. For an ad hoc group or a
group dial fax, the billing number will be credited for each successful fax sent to each destination.
The default setting is off. To print a report showing the total for each billing code, see Printing the
billing codes report.
To turn billing codes on or off
1 Press menu/enter.
2 Use the < or > button to select Fax Setup and press menu/enter.
3 Use the < or > button to select Fax Send Setup and press menu/enter.
4 Use the < or > button to select Billing Codes and press menu/enter.
5 Use the < or > button to select On or Off and press menu/enter.
Changing the V.34 setting
V.34 is the modem protocol used by the product to send faxes. It is the worldwide standard for
full-duplex modems sending and receiving data across telephone lines at 1,200 or 2,400 bps. The
default setting for V.34 is on.
To turn the V.34 setting on or off
1 Press menu/enter.
2 Use the < or > button to select Fax Setup and press menu/enter.