Filter
Top Products
Advanced features
3
Press
ENTER
to save the setting.
Note: If you press
ENTER
without entering the
PIN
, the fax machine beeps, indi-
cates No
PIN
Number on the
LCD
and then returns you to step 2.
4
Continue with the steps for creating or modifying a batch box (p ages 3.11 3.12).
Now you can perform batch transmission to this box while the
PIN
mask is activated.
Setting Block Junk Fax
Your fax machine s Block Junk Fax feature let s you bar the gates against unauthorized
incoming faxes ( junk fax ). But before you block junk fax, first underst and h o w this fea -
ture works, to determine if it s right for you. There are four possible settings for Block
Junk Fax:
Off The feature isn t activated.
Mode1 Your fax machine checks whether the last four digit s of any phone number
in your autodialer matches the last four digit s of the remote fax s subscriber
ID
(the
phone number part of the
TTI
). If it doesn t find a match, your machine disconnect s
the call.
Mode2 This mode rejects any call from a number whose last eight digits match
any number in the blocked numbers list (explained later). Y our machine can hold up
to 50 blocked numbers.
Mode3 This reject s numbers that are not in the autodialer and also reject s numbers
that are in the blocked numbers list. This let s you keep a number on your autodialer
for transmission to it, while still blocking it s incoming calls by putting it in the blocked
numbers list.
But before you activate the Block Junk Fax feature, please consider:
Not all fax machine owners enter their phone numbers in their Subscriber
ID
s.
W ith Block Junk Fax activated, your machine would reject faxes from these
machines.
Access codes can cause confusion. If an autodialer entry ends with extra codes,
such as long-dist ance codes, Block Junk Fax will block out calls from those faxes.
To set Block Junk Fax :
1
Press Program key,
B
, 2, 1, 0,
ENTER
.The
LCD
shows your fax s current setting:
2
Press or until the mode you want appears.
Here, we ve chosen Mode2.
3
Press
ENTER
to save the setting.
What you do next depends on what you selected in step 1:
If you selected Off or Mode1, press
STO P
to return to st andby mode.
If you selected either Mode2 or M o d e 3, go on to step 4.
Block Junk Fax:Mode2
/
/Enter
Block Junk Fax:Off
/
/Enter
3.53