Filter
Top Products
1.10
Getting st arted
6
Press or until the recording p aper size for the byp ass tray you want
appears. In this example, we ve chosen Ltr.
7
Press
ENTER
.
Press
STO P
to return the machine to st andby mode.
Loading p aper in byp ass tray
When you need to use a size of paper not currently loaded in your machine s p aper cas-
sette(s), or when you want to use a special type of p aper (such as transparency film),
use the bypass tray.
1
Open the bypass tray on the right
side of your machine.
2
Pull out the hopper of the byp ass
tray and pull the flapper release
lever .
3
Place the p aper on the bypass tray.
Adjust the p aper guide to fit the
paper and insert the p aper until it
comes to a stop.
Then push back the flapper release
lever .
Note: In Fax mode, if you have set the Letter, Legal or Half-letter sized p aper in the
byp ass tray, the machine will use this p aper when it runs out of the paper in the
paper cassette during the fax reception.
Bypass Tray :Ltr
/
/Enter