Muratec MFX-1300/1700 All in One Printer User Manual


 
2.20
Basic operation
Call request
You can send or receive a fax message and have a regular phone conversation on the
same call .
For more information on how to use this function, see page 3.24.
Dialing in the event of a power failure
Y our fax machine can only receive telephone calls even in the event of a power failure, if
an optional handset is att ached. But it cannot send or receive a fax document.
Att aching an optional handset
You may purchase an optional handset for your fax machine. Here is how to attach the
handset.
1
Using a Phillip s-head screwdriver, att ach the handset cradle to the lef t
side of your machine, using the screws included with the cradle.
2
Plug one end of the handset cord (it s curled) into the
PHONE
1 jack on the rear
side of your machine.
3
Plug the other end of the handset cord into the jack on the handset. If connected
to a phone line, your fax machine is now of f-hook.
Note: The handset has a small flash button which you can press while holding
the handset, putting the fax machine back on-hook until you can hang
up the handset properly in step 4.
4
Place the telephone handset onto the handset cradle. The cradle will press the
handset s flash button, hanging up the handset.
Att aching a second phone
W ant to att ach a second phone (even a cordless model!) to your fax machine, so they
can share the same phone jack? No problem.
Before we go further, let s explain the idea. Y ou re plugging the second phone s phone
line into your machine s
PHONE
2 jack, not the wall phone jack. In such a setup, only your
machine connects to the wall. The second phone receives phone signals through your
machine.
Now, let s proceed
1
If your second phone is already plugged into a wall phone jack, disconnect it from
that jack. Hold onto the phone plug; you ll need it in step 2.
Note: Of course, if your second phone is a model which requires AC power, as
is true for the base of a cordless phone, don t unplug it from it s AC power
jack!
2
Using the plug mentioned in step 1, plug the phone cable from your second
phone into the
PHONE
2 jack on the lef t side of your fax machine.
LINE
PHONE1PHONE2