Filter
Top Products
Advanced features
6
Press
ENTER
.The
LCD
asks which list you want to program into the programmable
one-touch:
7
Press until the list you want appears.
8
Press
ENTER
.
9
Press
STO P
to return your machine to st andby mode.
Programming a document storage operation
If you want to program a programmable one-touch key to store an F-Code polling docu-
ment, two things must be true:
The F-Code bulletin box must exist on your fax machine.
You must know the F-Code bulletin box s two-digit number ( 01-50) and name.
To program your programmable one-touch to store a regular polling document or
F-Code polling document:
1
Press Program key,
A
, 3, 0, 1,
ENTER
.The
LCD
shows the first empty programma-
ble one-touch number available:
Note: If P 2 appears on the
LCD
, it means that you have already entered a num -
ber for P 1 . You can see what you programmed into P 1 by pressing , if
you want. For example, if you set P 1 for storing of the polling document,
you will see:
Press to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see p age 3.48.
2
Press the key that you want to program or change. Here, we ve selected P2 .
Note: If your previous command for this key was to store a document and you
want to keep this key programmed to store a document, use these
instructions to make changes. But if you want to assign this key to a com -
pletely dif ferent operation (for a delayed transmission, for example), then
you first must erase the stored command before programming the new
one.
3
If you want to select a dif ferent programmable one-touch key than the one that
appears on the
LCD
, press that key now.
4
Press
ENTER
.The
LCD
asks which operation you want to program into the pro -
grammable one-touch:
Note: If changing a previously stored command, skip to step 7.
Type :Communication
/
/Enter
Select Program No.
P2:No Number Stored
Select Program No.
P1:Polling Document
Select Program No.
P2:No Number Stored
P2:Machine Settings
/
/Enter
3.46