Filter
Top Products
Just in case
What you see on the
LCD
What it means/What to do
Please Supply Paper The paper cassette or bypass tray is out of p aper.
Supply paper to the cassette and/or the byp ass
tray .
Please Wait Your fax machine s printer is either warming up or
busy. Please wait until the fax is finished printing
and then re-try your command or operation.
Polling In Use You tried to store the polling document in your fax
machine, where one already had been stored.
W ait for the fax to complete the regular polling
operation or delete the stored document, then try
again.
Printer In Use The command you re trying to enter requires the
use of the printer, which is already in use. W ait for
the fax to finish printing, then try again.
Protect Doc. Stored A received document was in your fax s memory
when you tried to turn of f the security reception
passcode. Print the received document from your
fax s memory, then retry the desired operation.
Ration must be 100% You cannot set the magnification ratio in
Negative/Positive copy or Ultra copy mode.
Set the magnification ratio to 100 % to use the
Negative/Positive copy or Ultra copy mode.
REPLACE DRUM SOON Your drum will need to be replaced soon.
Please contact your authorized Muratec dealer to
purchase a new drum cartridge if you don t
already have one.
REPLACE DRUM UNIT Your drum cartridge doesn t work.
PRINTER NOT USABLE Your machine cannot print until it is replaced with a
new drum cartridge.
Replace it.
Scanner In Use The command you re trying to enter requires the
use of the scanner, which is already in use. W ait
for the fax to complete the scan, then re-try the
desired command.
What you see on the
LCD
What it means/What to do
SecurityRx is Off You tried to turn the security reception
ON
using a
Sof t key which is assigned to set the security
reception to
ON
or
OFF
, but security reception set -
ting has not set to on.
To turn on or off the security reception using a Soft
key, first set the security reception setting to on.
(See pages 3.49 3.50.)
Select Paper Size You tried to make a copy in the following condi -
tions:
Paper size selection is set to Auto .
The bypass tray has the p aper other than Letter,
Legal, Half-letter .
Paper cassette(s) runs out of p aper.
Press
PAPER SIZE
to select your desired p aper.
Sub-address In Use You tried to enter a sub-address identical to one
already being used in another F-Code box. Enter a
different sub-address.
TONER ALMOST EMPTY Your machine is almost out of toner.
Please contact your authorized Muratec dealer
soon to purchase a new toner cartridge if you
don t already have one.
TONER EMPTY Your toner cartridge is empty.
PRINTER NOT USABLE Replace the toner cartridge. Y our machine cannot
print until it is replaced with a new toner cartridge.
Too Many Characters You attempted to enter too many numbers or other
characters in the current operation.
Press
CANCEL
to delete the extra characters, then
try again. Y ou may wish to review the operation s
appropriate instructions.
Too Many Locations You tried to enter too many numbers for a broad-
cast. Y ou can enter up to 200 autodialer number
and up to 30 numbers entered through the
numeric keypad.
Press
CANCEL
to delete the extra numbers and
then try again.
5.8