Filter
Top Products
2.6
Basic operation
12
At the end of the operation, your fax machine beeps and displays:
Important: Whenever you transmit a document, what actually appears on the
top line of the display depends on information stored in the remote
fax. The line may even be blank.
Note: If the call fails, see Redialing, p age 2.6.
Sending a fax using MONITO R/CALL key or a handset
You also can fax a document using either the monitor speaker or the optional
handset to dial the call.
Note: If you want to use
MONITO R
/
CALL
key, you should assign it to a Sof t key in
advance. (See page 3.16.)
Note: In this function, you cannot send a fax using the
FBS
glass.
1
Insert the document to the
ADF
.
2
Adjust resolution and contrast if necessary.
3
Obt ain a dial tone, either by :
Pressing
MONITO R
/
CALL
or
Lif ting the optional handset.
In either case, the
LCD
shows:
4
Enter the fax number by using the numeric keypad.
Also, enter access codes with the number, just as for a regular phone call.
5
When you hear fax tones from the remote unit, press
START
.
Note: If a person answers the phone, use the optional handset to tell that per -
son that you re trying to send a fax. When you hear fax tones, press
START
.
6
If you re using an optional handset, hang up af ter pressing
START
.
7
At the end of the operation, your fax machine beeps and displays:
Note: If the call fails and you used
MONITO R
/
CALL
to dial, press
MONITO R
/
CALL
to
hang up. Or if you ve pressed
START
to begin the fax transmission, press
STO P
to end it.
Also see Redialing manually, below, if the call fails.
Redialing
Automatically fax redialing
If your fax call fails, your machine automatically redials it. In this Auto Redial mode, your
fax automatically redials the number up to two times at one minute intervals.
Note: You can change the redial time and interval settings. (See Changing redial set -
tings, p age 4.5.)
While in the Auto Redial mode, the machine can continue to receive faxes and can
make as many as 99 fax transmissions.
Note: If you used either the
MONITO R
/
CALL
key or a handset to dial the call, you must
redial manually (see below).
Note: If the last redial attempt fails, your machine may print (and/or display) error
messages.
Redialing manually
You can always redial calls manually. And you must redial manually if you used either
the
MONITO R
/
CALL
key or an optional handset to dial the failed call.
Note: To use
REDIAL
/
PAUSE
key, you should assign it to a Sof t key in advance. (See
page 3.16.)
To redial a fax call manually without using the
MONITO R
/
CALL
key or an optional
handset:
1
Set the document and set the resolution and contrast.
2
Press
REDIAL
/
PAUSE
. The
LCD
will show:
View Redial History
0:1234567890
919725552009
** Complete **
** Tel Mode **
919725552009_
** Tel Mode **
_
919725552009
** Complete **