Filter
Top Products
2.14
Basic operation
5
As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
6
Press
START
.
Note: To reset the copy p arameter to default setting, press
COPY RESET
.
Note: To stop the copying, press
STO P
.
Using the byp ass tray
When you need to use a size of paper not currently loaded in your machine s p aper cas-
sette(s), or when you want to use a special type of p aper (such as transparency film),
use the bypass tray.
Important: If loading transp arency (OHP) film into the byp ass tray, be sure that the
sheet is designed for laser printers and not for copiers. Also, be sure that
the film does not have a p aper backing and/or a leading strip. If it does,
remove the paper backing and/or strip before inserting. Only film should
go in, not film with any backing or strip.
1
Either insert the document in the
ADF
or place it on the
FBS
glass.
2
Set the p aper in the bypass tray.
See the t able of Accept able p aper size and cassette capacity on p age 1.8 and
Loading paper in byp ass tray on p age 1.10 for more information.
Note: Place the original document in the same orient ation as the p aper in the
paper source.
3
The machine will select the bypass tray for the p aper
source and the
LCD
will show the default p aper size you
have set in step 6 on p age 1.10.
If you want to change it, proceed to step 4.
Otherwise, skip to step 10.
4
Press
BYPASS
to change the paper size. The
LCD
will show:
5
If your recording p aper on the bypass tray is Letter , Legal or Half-letter , proceed
to step 6. Otherwise, skip to the step 7.
Note: When you use transparency film, skip to step 8 and select OHP in step
9.
6
Press or until your desired recording p aper size appears. Here, we ve cho-
sen Legal :
Skip to step 9.
7
Press or until Other appears.
Then press or
ENTER
. Y ou will see:
8
Press or until your desired recording p aper size appears. Here, we ve cho-
sen Postcard:
9
Press
ENTER
.
10
If necessary, select desired resolution, contrast, reduction/enlargement ratio.
11
Press
START
to begin the copying process.
Set Bypass Ppr:Post
/
/
/Enter
Set Bypass Ppr:Exe
/
/
/Enter
Set Bypass Ppr:Other
/
/
/Enter
Set Bypass Ppr:Legl
/
/Enter
Set Bypass Ppr:Ltr
/
/Enter
Copy Ready 1
[ Ltr ] Ltr 100%