Filter
Top Products
Advanced features
18
Press
ENTER
. The
LCD
asks if you want to send a cover p age for this programma-
ble one-touch number.
19
Press until the mode you want appears.
20
Press
ENTER
. The
LCD
asks if you want to turn the Fax & Copy feature on or of f for
this programmable one-touch number.
21
Press until the mode you want appears.
22
Press
ENTER
.
23
Press
STO P
to return your machine to st andby mode.
Programming regular polling
To program a regular polling operation into a programmable one-touch key:
1
Press Program key,
A
, 3, 0, 1,
ENTER
.The
LCD
shows the first empty programma-
ble one-touch number available:
Note: If P 2 appears on the
LCD
, it means that you have already entered a num -
ber for P 1 . You can see what you programmed into P 1 by pressing , if
you want. For example, if you set P 1 for storing of the polling document,
you will see:
Press to go back to the programmable one-touch key you want to
enter.
2
Press the key that you want to program or change. Here, we ve selected P2 .
Note: If your previous command for this key was for a polling transmission and
you want to keep this key programmed for a polling transmission, use
these instructions to make changes. But if you want to assign this key to
a completely dif ferent operation (for a delayed transmission, for exam -
ple), then you first must erase the stored command before programming
the new one.
Note: To erase a programmable one-touch key, see p age 3.48.
3
If you want to select a dif ferent programmable one-touch key than the one that
appears on the
LCD
, press that key now.
4
Press
ENTER
.The
LCD
asks which operation you want to program into the pro -
grammable one-touch:
Note: If changing a previously stored command, skip to step 7.
5
Press until Communication appears.
Type :Communication
/
/Enter
Type :Communication
/
/Enter
Select Program No.
P2:No Number Stored
Select Program No.
P1:Polling Document
Select Program No.
P2:No Number Stored
Fax & Copy :---
/
/Enter
Cover Page :---
/
/Enter
3.39