Muratec MFX-1300/1700 All in One Printer User Manual


 
1.6
Getting st arted
Inst alling the printing supplies
Y our fax print s incoming faxes and copies with a reliable 600 dpi print engine. Y our fax
requires two types of printing supplies (sometimes also called consumables):
The drum cartridge It yields 20,000 normal letter-sized printout s (see
S pecifications, p age
AI
.2). By normal, we re referring to the amount of text and/or
graphics on each page. This is based on an industry-st andard test document.
The toner cartridge It yields 16,000 normal , letter-sized printout s (see
S pecifications, p age
AI
.2).
Note: The toner cartridge included with your machine is st arter toner cartridge, which
yields 3,000 printout s. Please purchase regular, full-yield toner cartridge from
your authorized Muratec dealer.
To inst all these supplies:
Important: Gently close the top cover so that you don t catch your hands, possibly
injuring them.
1
Pull up the top cover
release and open the top
cover.
2
Slide the printer cover
release and open the
printer cover.
3
U n p ack a new toner cartridge from it s car -
ton. Then, holding the toner cartridge with
both hands, slowly shake it to distribute
the toner evenly inside the cartridge.
Note: Do not touch the roller of the
toner cartridge.
4
Gently inst all the
toner cartridge in the printer, making
sure the toner cartridge s two pins fit in
the slit s inside the printer frame.
5
U n p ack the drum cartridge from it s carton.
Note: Shield the drum cartridge from light, especially strong light. Later, if you
have to remove the cartridge from the machine, immediately wrap it in a
thick cloth to protect it from light.
6
Gently inst all the drum cartridge in the
printer , making sure the drum car -
tridge s four pins fit in the slit s inside the
printer frame.