Filter
Top Products
Just in case
What you see on the
LCD
What it means/What to do
Macro In Use You tried to change the function for a Sof t key, but
that Sof t key has been programmed in a Macro
key. You cannot change the Soft key function until
erase the Macro key that contains the Sof t key you
want to change. Erase the Macro key, then try
again.
Memory Overflow During transmission (or copying), you tried to
Start Or Cancel enter more pages into memory than your fax could
store. Press
START
to tell your fax to keep as many
pages in memory as possible, or press
CANCEL
to
delete from memory all pages stored during this
operation (but not previous operations).
Mirror Carriage Error The mirror carriage of your machine has become
inoperable. Call your authorized Muratec dealer or
Muratec Customer Support.
Mirror Locked The transport mode is not turned off.
Turn off the transport mode (see page 1.8).
No Command You pressed
REVIEWCOMMANDS
to review upcoming
commands, but your fax machine had none
stored.
No Department Code You tried to turn on the dep artment code setting
but there are no department codes stored in your
fax machine. S tore at least one dep artment code,
then try again.
. . . or . . .
You entered incorrect dep artment code at fax
sending while the department feature is on. Enter
correct dep artment code.
No Document Stored You tried to print a document from memory, but
your fax machine had none stored.
N o D ru m The drum cartridge is missing or has not been
properly inst alled in your fax machine.
Please properly inst all the drum cartridge.
No Number Stored You selected an autodialer, batch box or F-Code
box number for which there is no fax (or phone)
number programmed. Either choose another num -
ber or dial a phone number directly from the
numeric keypad.
What you see on the
LCD
What it means/What to do
No Passcode You tried to program a security feature (see p age
3.49), but there s no protection passcode stored in
your fax machine. S tore a protection p asscode in
your machine, then retry again.
No PIN Number You selected Mode1 in the
PIN
mask feature and
tried to call an autodialer number in which no PIN
has been entered, or to call using numeric keypad
without
PIN
. Enter a
PIN
, then try again.
No Report You requested an activity journal or confirmation
report, but your fax machine has no record of any
fax jobs having occurred.
No Toner Cartridge The toner cartridge is missing or has not been
properly inst alled in your fax machine. Please
properly inst all the toner cartridge.
Not Allowed in Macro During macro registration, you pressed the key
which cannot be registered in Macro, such as
Monitor/Call key or Security Reception key.
Other Key Setting You tried to enter the same function which is
already stored in other Sof t key.
S tore the different function.
Open Top Cover The paper is jammed in your fax machine.
Please Remove Paper Open the cover indicated on the LCD, and
Open 1st Side Cover
remove the jammed paper carefully.
Please Remove Paper
Open 2nd Side Cover
Please Remove Paper
Open Top/2-Bin Cover
Please Remove Paper
Remove Bypass Paper
Open&Close Top Cover
Open&Close ScanCover Either your document wasn t inserted correctly,
Reset Document or the fax to which you re sending can t handle the
document s page length . Reset the page and try
again.
Please Call Service The printer unit of your fax machine has become
inoperable. Call your authorized Muratec dealer or
Muratec Customer Support.
5.7