Filter
Top Products
2.12
Basic operation
Y our machine s copier features
Your machine has the following copier features:
Single copy (see the right column on this p age)
Stacking multiple copies (see p age 2.13)
Sorting multiple copies (see p age 2.13)
Enlarged or reduced copies (see page 2.13)
Negative/positive copy (Reverse black and white areas) (see page 2.17)
Combine copy (only for MFX-1700) (see page 2.17)
Ultra copy mode (only for MFX-1700) (see page 2.18)
Basic copy procedure
1
Press
COPY
/
FA X
to change to
Copy mode.
When the machine is in the Copy mode, the
LCD
shows:
Note: For det ails about each item, see Making copy settings, pages 2.15 2.16
2
Place your original document in
ADF
face up , or on the
FBS
glass face down just
as you would to send a fax.
3
Enter the document size by pressing the
DOCUMENT SIZE
.
4
As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
Set copy reduction or enlargement ratio
Note: For det ails about each item, see Making copy settings, pages
2.15 2.16.
5
Press
START
.
Note: To reset the copy p arameter to default setting, press
COPY RESET
.
Note: To stop the copying, press
STO P
.
Single copy
1
Press
COPY
/
FA X
to change to Copy mode.
2
Place your original document in
ADF
face up , or on the
FBS
glass face down just
as you would to send a fax.
3
If you are using
FBS
glass, enter the document size by pressing the
DOCUMENT SIZE
.
4
As needed, set the following:
Select document type and adjust image contrast
Set copy reduction or enlargement ratio
Note: If you want to enlarge copy, use the
FBS
glass.
5
Press
START
.
Number of copies
Copy reduction or enlargement ratio
Recording paper size
Document size
COPY/FAX key
Making copies