Filter
Top Products
1.15
Getting st arted
*3: This option appears only if the optional NIC (network interface card) has been installed.
Level one function Level two function Level three function Summary of setting Default setting Page
B. User Settings 2.Fax Settings 01.Scan Parameters You can set the following settings for send fax message.
Primary resolution mode Normal 4.1
Primary contrast mode Normal
02.Print Parameter You can set the following settings for receive fax message.
Reduction rate Auto
Reduction margin 4 0 mm
4.3
Half-p age reception Off
03.# of Rings Number of rings before your machine answers. Two times 4.4
04.Redial Number of times and interval for automatic fax redialing. T wo times
4.5
One minute
05.Dialing Pause Dialing p ause length. Two times 4.5
06.Memory Tx On/Off setting for Memory transmission. O n 4.2
07.Quick Memory Tx On/Off setting for Quick Memory transmission. O n 4.2
08.TTI Tx On/Off setting for sending your TTI. O n 4.2
09.ECM Mode On/Off setting for ECM mode. O n 4.1
10.Block Junk Fax Reject the fax reception from unauthorized incoming faxes. Of f 3.53
11.Security Rx Keep all received fax messages in memory and after print them. Of f 3.49
12.PIN Mode Prevent unauthorized long-distance calls. Of f 3.51
13.Passcode Enter p asscode for limiting polling access. 3.15
14.Rotate Rx On/Off setting for Rotate reception.
Of f 4.4
(for MFX-1700 only)
14.DRD (for MFX-1300) Set the ring p attern to use with phone company s Distinctive Ring
Off 3.23
15.DRD (for MFX-1700) service.
3.Copy Settings 01.Scan Parameters You can set the following settings for copying.
Primary document type Text 4.6
Primary contrast mode Normal
02. Print p arameter You can set the margin for copying. 2 4 m m 4.6
03.Auto Reset Time Set the time (minutes) of resetting the copy p arameters. 3 minutes 4.7
04.Copy Auto Set the default setting to Auto for one of the following:
Paper size 4.7
Paper size Reduce/Enlarge ratio Document size
05.Copy Protect On/Off setting for Copy protection. Of f 2.18
06.Sort Copy On/Off setting for Sorting copy. O n 4.7
07.Nega/Posi On/Off setting to reverse copy of black and white areas. Off 2.17, 4.7
08.Combine On/Off setting to combine.
Of f 2.17, 4.8
(for MFX-1700 only)
4.Printer Settings 01.TCP/IP*
3
Enter the IP Address, Subnet mask and Gate way address.