Filter
Top Products
6
Press
ENTER
.
If you ve entered an incorrect
I
.
D
. code, your fax machine rejects the attempt and
returns to st andby mode.
If you ve entered the correct
I
.
D
. code, the display shows:
Note: If you want to quit without erasing the F-Code box you ve selected, press
CANCEL
. The fax will return to step 2.
Note: If you want to quit without erasing any F-Code box, press
STO P
.
The machine returns to standby mode.
7
Press
ENTER
to erase the F-Code box.
To erase another F-Code box, repeat steps 2-7.
To finish, press
STO P
.
F-Code transmission and polling
W ith F-Code, your machine can send secure transmissions, perform relay broadcast ini -
tiations and even poll from other
ITU
-
T
-equipped machines, regardless of manufacturer.
You can do this two ways:
Using the programmable one-touch key (see pages 3.40 3.43)
Entering the
ITU
-
T
sub-address and p assword directly, which is what we ll describe
here.
Note: For F-Code communication to work, three things must be true:
The remote fax machine must support
ITU
-
T
sub-addressing
The remote fax must have a mailbox with an
ITU
-
T
sub-address created on it
You must know the
ITU
-
T
sub-address and p assword (if any) for the remote
machine s mailbox
F-Code transmission
1
Insert the document.
2
Adjust the resolution and contrast if necessary.
3
If you want to toggle between real time transmission and memory transmission,
press
MEMORYTRANSMIT
.
4
Press
ADVANCEDFUNCTIONS
three times and then press
ENTER
.
5
Use the numeric keypad to enter the appropriate sub-address in the remote
machine. In this example, we ve entered 123456.
Note: If you make a mist ake, press
CANCEL
to erase the character, then enter
the correct number.
6
Press
ENTER
. The
LCD
shows:
Note: If this sub-address does not have a p assword, skip to step 8.
7
Use the numeric keypad to enter the password. In this example, we ve entered
654321.
8
Press
ENTER
. The
LCD
shows:
9
Enter the fax number either by pressing a one-touch key, entering a speed-dial
number or dialing from the numeric keypad. Do not press
START
.
10
What you do now depends on when you want the transmission to begin.
To have it begin n o w , skip to step 13.
To delay it, go on to step 11.
11
Press
ADVANCEDFUNCTIONS
,
ENTER
. The
LCD
shows:
12
Use the numeric keypad to enter the day and time when the transmission should
begin, then press
ENTER
.
13
Press
START
.
Delayed
Enter Time: 15/17:05
Enter Fax Number
_
Enter Password
654321_
Enter Password
_
Enter Sub-Address
123456_
Enter Sub-Address
_
Erase F-Code Box
** Complete **
03:Erase F-Code Box
Check Enter/Cancel
Advanced features
3.33