Filter
Top Products
2.13
Basic operation
Stacking multiple copies
1
Press
COPY
/
FA X
to change to Copy mode.
2
Press
SORT
to turn the sort setting of f.
Note: The default setting of sorting is O n . To change the default setting, see
page 4.7.
3
Place your original document in
ADF
face up , or on the
FBS
glass face down just
as you would to send a fax.
4
Enter the document size by pressing the
DOCUMENT SIZE
.
5
Using the numeric keypad to enter the number of copies you want (up to 99).
6
As needed, set the following:
Select document type and adjust image contrast
Set copy reduction or enlargement ratio
Note: For det ails about each items, see Making copy settings, p ages
2.15 2.16.
7
Press
START
.
Note: To stop the copying, press
STO P
.
Sorting multiple copies (using ADF)
Note: You cannot use the
FBS
glass for sorting multiple copies.
1
Press
COPY
/
FA X
to change to Copy mode.
2
Make sure the
LED
on
SORT
glows, which means the sort setting is turned on.
Note: If it does not glow, press
SORT
to turn it on.
3
Place your original document in
ADF
face up, just as you would to send a fax.
4
Set the document size by pressing the
DOCUMENT SIZE
.
5
Using the numeric keypad to enter the number of copies you want (up to 99).
6
As needed, set the following:
Select document type and adjust image contrast
Set copy reduction ratio
Note: For details about each items, see Making the copy settings, p age 2.15.
7
Press
START
.
Note: To stop the copying, press
STO P
.
Enlarged or reduce d copies
Your fax machine is cap able of enlargement and reduction when copying.
Note: The copy enlargement and reduction rate setting is available only for copying,
not for faxing.
Important: Copy enlargement is available only for copying using the
FBS
; it is not
available for copying using the
ADF
.
1
Press
COPY
/
FA X
to change to Copy mode.
2
Place your original document in
ADF
face up , or on the
FBS
glass face down just
as you would send a fax.
Note: If you want to enlarged copy, use
FBS
glass.
3
Enter the document size by pressing the
DOCUMENT SIZE
.
4
Choose an enlargement or reduction ratio using or of the cursor key.
You can reduce to 78%, 64 % or 50 % of the original size
OR
You can enlarge to 129% or 200 %
OR
Press
ZOOM
to turn the
ZOOM
light on, and adjust the ratio at 1% steps using or
of the cursor key. You can enter the ratio between 50% and 200%.
OR
Directly enter any percent age between 50 % and 200 % by following procedure.
1. Press #.
2. Using the numeric key to enter your desired ratio (50 to 200).
3. Press # again.
129%: Half-letter (5.5 ″ 8.5 ″)→ Letter (8.5 ″ 11″)
78%: Legal (8.5″ 14″)→ Letter (8.5 ″ 11″)
Helpful T ip: You can set the copy reduction or enlargement ratio to Auto . (See
Setting copy auto, p age 4.7.) If the Auto is set and you set the
document size by pressing
DOCUMENT SIZE
, the machine automati -
cally reduce or enlarge the original size (you entered) to fit on the
paper size you selected.