Filter
Top Products
Advanced features
18
Press
ENTER
. The
LCD
asks you to select a contrast mode for each programmable
one-touch number.
19
Press until the mode you want appears.
20
Press
ENTER
. The
LCD
asks if you want the memory transmission on or off when
using this programmable one-touch number.
21
Press until the mode you want appears.
22
Press
ENTER
. The
LCD
asks you for the type of confirmation report you want to set
for this programmable one-touch number.
23
Press until the mode you want appears.
24
Press
ENTER
. The
LCD
asks if you want to send a cover p age for this programma-
ble one-touch number.
25
Press until the mode you want appears.
26
Press
ENTER
. The
LCD
asks if you want to turn the Fax & Copy feature on or of f for
this programmable one-touch number.
Note: When the memory transmission is set to off in step 20, this
LCD
will not
appear and go to step 29.
27
Press until the mode you want appears.
28
Press
ENTER
.
29
Press
STO P
to return your machine to st andby mode.
Programming F-Code polling
For this operation to work, two things must be true:
The document which you re polling must exist in the remote fax s F-Code box (
ITU
-
T
standard sub-addressing/password box).
You must know the remote fax s
ITU
-
T
sub-address and password (if any) for each
box you want to poll.
To program an F-Code polling operating into a programmable one-touch key:
1
Press Program key,
A
, 3, 0, 1,
ENTER
.The
LCD
shows the first empty programma-
ble one-touch number available:
Note: If P 2 appears on the
LCD
, it means that you have already entered a num -
ber for P 1 . You can see what you programmed into P 1 by pressing , if
you want. For example, if you set P 1 for storing of the polling document,
you will see:
Press to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see p age 3.48.
2
Press the key that you want to program or change. Here, we ve selected P2 .
Note: If your previous command for this key was for an F-Code polling opera-
tion and you want to keep this key programmed for an F-Code polling
operation, use these instructions to make changes. But if you want to
assign this key to a completely dif ferent operation (for a delayed trans -
mission, for example), then you first must erase the stored command
before programming the new one.
3
If you want to select a dif ferent programmable one-touch key than the one that
appears on the
LCD
, press that key now.
4
Press
ENTER
.The
LCD
asks which operation you want to program into the pro -
grammable one-touch:
Type :Communication
/
/Enter
Select Program No.
P2:No Number Stored
Select Program No.
P1:Polling Document
Select Program No.
P2:No Number Stored
Fax & Copy :---
/
/Enter
Cover Page :---
/
/Enter
Report :---
/
/Enter
Memory Tx :---
/
/Enter
Contrast :-------
/
/Enter
3.42