Filter
Top Products
1.3
Getting st arted
1
COPY
light Glows when the machine is in the Copy mode.
2
FA X
light Glows when the machine is in the Fax mode.
3
ALARM
light Glows when a problem occurs during fax communication, printing
or scanning. The light st ays on until the machine print s a Check Message report .
4
COMM
. light Glows when the machine is communicating with another machine.
5
MEMORYRECEIVE
light Glows when the machine is receiving an incoming fax
document into it s electronic memory.
6
Soft Keys Shortcut keys. Any function that can be turned on or of f can be pro -
grammed into these three keys. If the light above one of these keys glows, this
indicates the setting that s been programmed into it (see page 3.16) is turned on.
These keys are programmed at the factory to turn the following functions on or
off:
Sof t key 1:
ENERGY SAVING
Pressing this key, you can make the machine to be
in the Sleep mode immediately.
Note: If the optional printer controller has been inst alled to your machine, this
key will be
ONLINE
key.
Sof t key 2:
SORT
Press to turn the Sort feature on or of f.
Sof t key 3:
COMBINE
Press to turn the Combine feature on or off.
Note: If your machine is MFX-1300, this key is
FA X
&
COPY
to turn the Fax & Copy
feature on or of f.
7
BYPASS
Press to change the paper size of the byp ass tray.
8
COPY COUNT
Press to see the number of total printed p ages on the
LCD
.
9
BROADCAST
Press to send a broadcast fax (sending the same document to
more than one location).
10
GROUP
Press to set up a fax transmission to a call group, a set of fax numbers
which will receive the same document in one fax operation.
11
ADVANCEDFUNCTIONS
In Fax mode: Chooses from following several fax options delayed transmission,
Polling, F-Code transmission, F-Code polling and Batch transmission.
Or, in Copy mode: Chooses from following copy options Nega/Posi copy,
Combine copy (only for MFX-1700) or Ultra copy (only for MFX-1700).
12
COMM
.
CANCEL
/
CONFIRM
. Press to stop the transmission, or to review pending
fax commands and the activity journal.
13
START
Press to begin a fax transmission, reception or copying.
14
STO P
Stop s the current operation and ejects a document from the
ADF
.
Control Panel Overview
12 345 6 789101112 13 14
15161718192021222324252627
28