Filter
Top Products
Advanced features
If you specified real time transmission:
Your fax machine dials the other fax machine.
The
LCD
shows the Location
ID
and the document s width and resolution settings:
Note: If the entry doesn t have a Location
ID
,the number appears.
When the other machine answers, your fax feeds the document through its scanner,
transmitting as it goes. (To review Real time transmission, see page 2.3.)
One-touch phone dialing
To dial a p hone call using a one-touch number, you must have an optional handset
attached to your machine. (Contact your authorized Muratec dealer to order an optional
handset.)
To make the call:
1
Obt ain a dial tone by doing one of the following:
Lif t the handset
Press
MONITO R
/
CALL
to use the monitor speaker
2
Press the one-touch key in which you ve stored the number. As the machine
dials, it shows the number on the
LCD
:
Note: Remember that your fax machine s monitor speaker is not a speakerphone. If
you dialed by using the monitor speaker, pick up the handset to speak to the
person that answers.
Note: If the call fails, and you used
MONITO R
/
CALL
to dial, press
MONITO R
/
CALL
to hang
up.
Using speed-dial numbers
Your fax machine will store up to 145 speed-dial numbers, designated by three-digit
identifier codes from 001 through 145.
Entering or changing a speed-dial number
1
Press Program key,
A
, 2, 0, 1,
ENTER
.The
LCD
shows an empty speed-dial num-
ber:
Note: If a speed-dial number other than 001 appears on the
LCD
, it means you
have already entered a number for 001.
2
Use the numeric keypad to enter the desired speed-dial number s three-digit iden -
tifier code. Here, we ve entered 005 and the
LCD
shows either:
or
Important: When entering the identifier code for speed-dial numbers less than
100, you must enter leading zeros to make three digit s.
For example, 001-099.
3
If you want to select a dif ferent speed-dial number, press that number s three-
digit identifier code now. That number appears on the
LCD
.
4
Press
ENTER
.Depending on whether you already have a number entered for this
speed-dial number, the
LCD
now shows either:
or
5
Use the numeric keypad to enter the number exactly as your machine should dial
it, including whatever access codes your phone system requires. (You may want
to review Special dialing characters, p age 3.1.)
The number can be up to 40 characters in length:
Your display can show only 20 characters at a time. To view characters beyond
those 20, press to scroll to the lef t or to scroll to the right.
6
When the number appears as you want it, press
ENTER
to store it.
005:Fax Number
9-1-555-567-1234_
005:Fax Number
9-555-397-0123_
005:Fax Number
_
Enter Speed-Dial No.
005:9-555-397-0123
Enter Speed-Dial No.
005:No Number Stored
Enter Speed-Dial No.
001:No Number Stored
** Tel Mode **
9-555-2842_
Plano Office
A4 Normal
3.4