Filter
Top Products
2.7
Basic operation
3
Your machine can remember the last 10 dial numbers. Press or until the
dial number you want to redial appears.
4
Press
START
.
To redial a fax call manually with the
MONITO R
/
CALL
key or an optional
handset:
1
Make sure the document is in the
ADF
and that the resolution and contrast are
set.
2
Press
MONITO R
/
CALL
or lif t the optional handset to get a dial tone.
Note: If you want to use
MONITO R
/
CALL
key, you should assign it to a Sof t key in
advance. (See page 3.16.)
3
Press
REDIAL
/
PAUSE
. The
LCD
will show:
4
Your machine can remember the last 10 dial numbers. Press or until the
dial number you want to redial appears.
5
When you hear fax tones from the remote unit, press
START
.
Note: If a person answers the phone, use the optional handset to tell that per -
son you re sending a fax. When you hear fax tones, press
START
.
To redial a voice call manually using the optional handset:
1
Lif t the optional handset to get a dial tone.
2
Press
REDIAL
/
PAUSE
. The
LCD
will show:
3
Your machine can memory the latest 10 dial numbers. Press or until the dial
number you want to redial appears.
4
Press
START
.
When the other person answers, use the optional handset to speak to that per -
son.
Reviewing or canceling commands
Your fax machine can store many jobs in it s memory. And it keep s track of each one
by assigning it a command number, like C01.
Delayed commands, redial attempts and current fax transmissions are all stored in your
fax machine s memory and given a command number. Your machine can store up to 99
delayed commands. It identifies each by a two-digit command number ranging from 01 to
99.
The Review Commands function gives you the power to check on each job (or
command) in your machine s memory. It also lets you cancel a command if you decide
not to send the document.
To see your machine s stored commands or to cancel them:
1
Press
COMM
.
CANCEL
/
CONFIRM
.The
LCD
will show:
The
LCD
shows the first command, indicated by it s command number and the
phone number it will dial.
If your machine is attempting to perform a command n o w, it appears on the
display.
Note: If there are no stored commands in your machine, the
LCD
will show:
Press
STO P
to return to st andby mode.
Or, if you want to see the result of fax transaction, press
COMM
.
CANCEL
/
CONFIRM
.(See View the result of fax transaction on p age 2.9.)
Here, you see command 01, followed by the number it s set to dial. If the com -
mand is to send a broadcast, Broadcast appears instead of the phone number.
(See Broadcasting, page 3.9.)
If the command is to send a batch transmission, the
LCD
shows it s batch box
number (such as B01 ) rather than the command number. (See Batch transmis -
sion, p ages 3.11 3.13.)
If the command is for a Call group dialing , the group number (such as G01 )
appears instead of the phone number. (See Call group dialing, p age 3.7.)
2
Press or to scroll through currently stored commands.
No Command
C01:5552009
/
/
/Cancel
View Redial History
0:1234567890
View Redial History
0:1234567890