Filter
Top Products
40672201TX Rev.4
4 - 65
Fig. 4-2-2-1/2 FX-051 Mechanical Control Sequence (Single Page)
• Separation rubber
• S roller (includ feed, sensor and exit)
• Exit pinch
• CIS
• PC2
• PC1
21.2 mm
29.5 mm
4.5 mm
• ADF roller
• First pinch roller
ON: 15.7 mm
(OFF: 6.9 mm)
15.5 mm
Numerical numbers are theoretical values.
[Scanner section operation for single page copy and transmission]
* Sequence
* PC1
* S motor
* PC2
Document removal is shown on LCD for
over 10 seconds.
* PC2 turn on within 10 seconds.
(All keys operation are accepted during
the action.)
* Throughing:400 PPs x 20 pulses
Feeding starts after 800 ms from
PC1ON.
118 pulse
164 pulses
20 pulse
7.7 mm
10.6 mm
1.3 mm
90.9 mm
1400 pulses
Waiting
* Reading length
* Reading starts
* Document exits: 600 PPS
Motor may stop.
* End
* Machine returns to waiting state after 5 seconds.
(No motor excitation during waiting state)
Mode
(l/mm)
3.85
7.7
15.4
Pulse speed
(PPS)
800
800
400
Pulse
Count
4
2
1
Feed Speed
[mm/second]
52.0
52.0
26.0
* 1-2 phase drive (7.5°) motor constant voltage drive
* Throughing start is used for 600 PPS, 800PPS.
600 PPS
* Throughing, then 800 PPS
400 PPS x 5 pulses to 600 PPS x 5 pulses