Filter
Top Products
40672201TX Rev.4
2 - 9
11) TSI/CSI
20 characters maximum are displayed. If the function is enabled, the received TSI is
marked at the top of first reproduced copy.
12) Polling (TX & RX)
Documents set on the A.D.F. or in the memory can be polled from a remote station.
The machine can also receive documents from a remote station (RX).
Note: Password is not used for the Polling (TX & RX)
13) Acoustic monitor
The monitor is available about 5 seconds after dialing for TX mode only. Loudness is
selectable to zero.
14) Activity report
Activity report can manually printed out the latest 30 communications (all transmisson,
memory reception and error reception) . Normal reception is not reported in the
activity report.
Note : This function is not available for GER version.
15) Protocol dump
The protocol dump is printed out by manual operation .
16) Optional telephone
Optional telephone is not available.
17) Automatic alternate selecting call
Two facsimile numbers can be registered to each One-touch key (No. 1 to No. 10) for
sending a facsimile message to either of two distant numbers. When the first remote
station is busy, the machine automatically dials the other distant number.
18) Delayed TX
This function enters a message transmission time(s) and location(s) for execution at a
specified time. 5 specified times can be registered (within 3 days).