Filter
Top Products
40672201TX Rev.4
4 - 30
Function: To enable H or L or disable the line monitory sound.
In case setting H/L, monitor is enable for 5 seconds after dialing.
Operation: The operation for setting of default position is described in Fig. 4-3-17 and
4-3-18.
07: Buzzer volume selection (LOW/MID/HIGH)
Function: Selects the sound volume of each of the key touch tone, end of communi-
cation buzzer, voice request buzzer and off-hook alarm from the low,
medium and high levels.
Operation: The operation for setting of default position is described in Fig. 4-3-17 and
4-3-18.
08: Default arrangement for closed network (OFF/ T/R /RX)
Function: To disable or enable (OFF) the access to the FX-048/050VP175VP from
stations which are not registered in one-touch key or two digit auto dial
code.
Operation: The operation for setting of the default position is described in Fig. 4-3-17
and 4-3-18.
09: Default arrangement for TX mode
Function: To select the mode automatically set up when a document is loaded in the
feeder.
The following combinations are selectable.
STD/NORMAL STD/DARK FINE/NORMAL FINE/DARK
FINE/LIGHT
PHOTO/DARK
PHOTO/LIGHT
PHOTO/NORMALEX.FINE/LIGHT
EX.FINE/NORMALEX.FINE/DARK
STD/LIGHT
Operation: The operation for setting of default position is described in Fig. 4-3-17 and
4-3-18.
10: Default arrangement for TEL/FAX switchover timer (20 sec/35 sec)
Function: To specify the time for which the machine alerts you on reception of a call
in the telephone/fax automatic switchover mode.
Operation: The operation for setting of default position is described in Fig. 4-3-17 and
4-3-18.