Filter
Top Products
40672201TX Rev.4
4 - 13
Note 1: For convenience of description, the following assumptions are made for Fig. 4-1-1.
1) Five sheets of A4-size document be transmitted to an address, 3454 2111,
which is placed in standby in Auto Receive Mode. The Date and Time indication
is 14:59 FAX.
2) In One-touch Auto Dialing description, the telephone number, 3454 2111, had
been assigned to One-Touch key No. 1 in advance.
3) In Auto-Dial code Dialing description, the telephone number, 3454 2111, has
been assigned to Auto Dial Code 01 in advance.
4) The machine is available with a feature called "Auto-Start," which can be
enabled or disabled by the user and/or service man.
Note 2: To dial select a distant station, the machine is available using six different
methods:
1) ON Hook Dialing with Hook key
Pressing Hook key at ON-Hook status.
Machine will establish the connected line and operator can hear the dial tone
from the line. Then, operator can make dialling on real time basis by pressing
the numeric key on the operator panel.
Note: That it is available only when "Real Time Dial" is set to TYPE 2.
2) ON Hook Dialing without Hook key
Pressing numeral key (ON-Hook status)
LCD shows the numbers which are pressed.
Pressing START, then dialling starts entered number which are shown on LCD.
3) Manual Dialing by the use of the dialing facility of an external Telephone unit
connected to the machine.
4) Pressing One-Touch Auto Dial key to which the telephone number is assigned
in advance.
This operation corresponds to the leftmost in Fig. 4-1-1.
5) Pressing AUTO DIAL key followed by a 2-digits auto dial code to which the
telephone number is assigned in advance.