Filter
Top Products
40672201TX Rev.4
4 - 18
Pressing the START key will cause the machine to seize the line and start
dialing to the exchange. Similar to the case of One-Touch Auto Dialing, Fig.
4-4-6 shows AUTO START ON in parentheses, which denotes that there is
the case in which the operator does not need to press START when "AUTO
START" is enabled.
OKI HONJYOU
DIALING
After checking dial tone or elapse time of waiting, all the digits for dialing will
be appeared into the top line of the LCD as:
0495 22 2111
DIALING
When the machine has completed dialing, the message on the LCD would
change to:
0495 22 2111
CALLING
The machine proceeds to send the message which is identified by the
"TWO-DIGIT AUTO DIAL CODE" block shown in Fig. 4-1-1 Assuming that
the call is answered, the operator may hear the CED tone returned from the
distant station through the built-in speaker.
Keypad dialing
Assuming the handset is on hook, the operator can immediately tap the
first digit, "0" in this example case. The machine responds to the command
and displays the following message on the LCD.
0
Thereafter, the operator simply continues to entry the remaining digits in the
telephone number.
00116097784184
The message is shown in Fig. 4-4-6. Upon completion of the entry of the
telephone number, the operator taps the START key.
001160977484184
DIALING