Filter
Top Products
40672201TX Rev.4
2 - 8
6) Manual redial
This feature is available to repeat dialing of the last called dial number.
There is no limit on the number of repeat attempts.
However, there are several restrictions in manual redial and feeder TX operation after
restoration of power.
After restoration of power, the machine can not return to the previous operation
condition before the power failure.
Restoration of power means that the voltage returns to the normal value after power
failure.
For example, the waiting condition of delayed preparation transmission (delayed
feeder TX) changes into abandoned documents after power failure. Abandoned
document means that the document was set on the feeder, and the phone number for
the feeder TX or TX preparation is not set.
Moreover, the waiting of redial condition of feeder TX or feeder TX preparation turns
into abandoned document conditions.
Since the registered data for redial is lost by power failure, the manual redial is not
available by the past data after power failure.
7) A.D.F.
The feeder feeds 15 sheets maximum (Letter/A4-size 13-28 1b).
When using recommended paper. 20 sheets maximum can be fed.
Note: Recommended paper: 20 1b bond paper (NA Letter and ISO A4-size)
8) Multi-Copy
The machine reproduces max. 50 copies of document with 3.85 lines/mm or 7.7 lines/
mm resolution locally.
9) Sender ID
Time & date, plus 32 characters maximum. The sender ID is marked to the top
(outside only) of every reproduced copy in the remote receiver.
10) Personal ID
The upper 16 digits of the Sender ID are sent to the remote station separately to
indicate the “personal ID”.
The personal ID is displayed at the LCD display and is also printed out in the activity
report in case of memory reception. This function is available only for communication
using NSF signal.