Filter
Top Products
40672201TX Rev.4
4 - 47
(2/2)
1. Title of the report
2. Date and time when the report was printed
3. Sender ID
4. Group number (#1 - #5)
5. Programmed one-touch numbers (01 - 10)
6. Programmed auto-dial numbers (01 - 70)
4.6.8 Protocol dump data printing
Format : See Fig. 4-5-8.
Purpose : To allow the serviceman to obtain a list of protocol signals transferred between
the transmitter and receiver.
Method : The report will be manually printed out for maintenance purpose.
Descriptions : 1. Title of the report
2. Date of communication
3. Time of communication
4. One message transmission/reception time
5. Identification of remote station
• CSI and/or telephone number
6. Mode of transmission/reception according to ITU-T designation
7. Total number of pages in communication
8. Identification of the result of the communication
9. Service code
10. Communication protocol
11. TX: DIS/DTC /NSF/ NSS/ NSC
12. RX: DIS/DTC/NSF/NSS/ NSC
13. Received telephone number
14. Transmitted telephone number
15. Received SEP/SUB
16. Transmitted SEP/SUB
4.6.9 Log Report
Purpose : The report will be manually printed out for fault analysis.