Filter
Top Products
40672201TX Rev.4
6 - 5
6.8 Recording Paper Skewing
The maximum allowable skew of the recording paper is ±1 mm over any advance of 100 mm.
6.9 Copy Density
The density of a black image printed on plain paper will be greater than 1.2 O.D.* regardless
of uniformity in all printing areas. The density of the white background (unprinted area) will be
no greater than 0.2 O.D. unit. All density measurements will be referred to a McBeth RD914
Densitometer.
* : 1.2 O.D. is guaranteed within the range shown in Figure 8-1.
*Note: O.D. of 1.2 or more (at 10 cm position after the test pattern print started).
Measured 30 min. after the test pattern print started.
6.10 Copy Uniformity
Printed copies will exhibit a uniform density of printed and background areas, within a varia-
tion of 25% units from edge to edge of a single copy and within a variation of 30% units from
one copy to the next.
6.11 Copy Stacking
The machine will discharge printed copies and stack them without jamming providing the
paper sizes are A4, Letter and Legal.
Copies will be stacked in the order in which they are printed without operator intervention and
the stacking mechanism will have a capacity of * 30 copies maximum.
The printed copies will be discharged on the stacker with printed face up.
* Note: 1) Using the recommended paper.