Filter
Top Products
40672201TX Rev.4
4 - 6
4.2.6 Auto Dial
Function: When pressed, will identify to the machine that the 2-digits code which follows is
an auto-dial code registered in advance.
A total of 70 locations numbered can be programmed.
The operator can use AUTO DIAL with the external handset both on hook and
off hook.
Display: When pressed, a guidance message will appear on LCD display, prompting the
operator to enter a 2-digits auto dial code.
4.2.7 Keypad
Function: Twelve keys on the keypad function the same as those of a conventional
keypad provided on regular telephone instruments. Numeral keys represent 1
to 0, inclusive, and “
*
” and “#,” the corresponding symbols. The operator can
use them for:
1) Directory dialing the full-digit telephone number and ID registration to select
a distant station.
2) Assignment of a full-digit telephone number to an auto dial code.
3) Entry of numerical data in the course of programming certain user functions
(for example, report printouts, Date and Time adjustment, Sender ID
selection, etc.).
4) Designation of the first character of the destination ID as the search object
in search dialing.
5) Registration of machine ID, TSI
Display: When a key is pressed, the numeral or symbol corresponding to the pressed
key will show up on LCD display.
4.2.8 REDIAL
Function: Directs the machine to redial the same telephone number used in the previous
call which failed connection to the called station by some reason (for example,
line busy, no answer, etc.).
This feature is called “Manual Redial,” and made effective immediately every
time
Note: After restoration of power, the machine cannot return to previous opera-
tion condition before the power failure. Restoration of power means that
the voltage returns to the normal value after power failure. Since the
registered data for redial is lost by power failure, the manual redial is not
available by the past data after power failure.