Filter
Top Products
40672201TX Rev.4
4 - 42
4.6 Reports and Lists
This Section presents the formats of reports and lists referred in the preceding paragraphs,
with some example entries for reference purposes.
The formats are attached to the last of Section 4 for reference purposes (Fig. 4-5-1 to 4-5-13
for US/CANADA/INT'L version.)
Brief descriptions for the items and sample data are given for the reader's convenience in
understanding the meaning and purpose thereof, except for those which are seemed self
explanatory.
The method to print out the reports and lists are in the flow charts Fig. 4-3-1 and Fig. 4-3-12.
4.6.1 Message confirmation report
Format : See Fig. 4-5-1 and 4-5-2.
Fig. 4-5-2 is only printed out by automatic report print mode after completion of
memory TX.
Purpose : To check the result of transmission just conducted or previous done.
Method : The report will be manually or automatically printed out.
Descriptions : 1. Title of the report
2. Date and time when the report was printed
3. Sender ID
4. Total transmission and reception time
5. Date of transmission or reception
6. Time when the communication started
(Time is not printed by automatic print out mode.)
7. Length of time for which the FX-051 was connected to the line
8. Identification of the remote station
Personal ID/CSI/Location ID/Dial number
9. Mode of the communication
Calling/Called/B.C. (Broadcast)/BOX
10. Total number of pages in particular communication
11. Result of the communication
OK/NO/STOP/COMP./BUSY/PAPER/S JAM/R JAM/COVER
12. Service code