Oki FX-051 Fax Machine User Manual


 
40672201TX Rev.4
2 - 4
13) Scanning method
2592 bits contact image sensor.
14) Printing method
211.3 mm (2496 bits) and/or 216.7 mm (2560 bits)
15) Minimum scanning time
NSS= 0, 5, 10 ms
DCS= 0, 5, 10 ms
16) Minimum print time
NSF= 0 ms
DIS=10 milliseconds for 3.85 lines/mm.
5 milliseconds for 7.7 lines/mm.
17) Print speed
Max. 8 sheets per minute (at NA Letter size)
Note : Under following conditions, the printing speed will be at 6 PPM.
- In PC print mode
- When the paper width is smaller than JISB5(128mm).
18) Power save
The FX-051 realizes low power consumption by new power supply unit.
This function is feeding power to the necessary minimum circuit at standby state by
adoption of New power supply. When the machine becomes the operation state, power
supply is feeding to the all circuits.
By adoption of this system, power consumption at standby state becomes below 0.5W.
Pre-heating time (Standby to Print):
Approx.30 sec
Note 1: When the “MCF automatic printing” is set to ON, the MCF printout time is as
follows. (Communication end to Print)
Approx. 20 sec
Note 2: This feature is not available FX-051 (ODA)
19) Coding scheme
Modified Modified READ (MMR), Modified READ (MR), and Modified Huffman (MH).