Filter
Top Products
40672201TX Rev.4
4 - 34
28: One-touch keys parameter
Function: To assign the following features combined together as echo protection to
each one-touch key.
Protective tone
Ignoring the 1ST DIS.
Operation: The operation for setting of default position is described in Fig. 4-3-1 and
4-3-17 and 4-3-18.
4.4.7.5 Data programming
Function: The kinds of data programming are:
1) Clock adjustment
2) System data programming
3) Dial parameter programming
Operation: The operation is shown in Fig. 4-3-1 and 4-3-17.
1. Clock adjustment
Operation: the programming operation is described in Fig. 4-3-1 and 4-3-20.
2. System data programming
Function: The kinds of system data programming are:
a) Registration of TSI/CSI/CIG
TSI (Transmitting Subscriber Identification)
CSI (Called Subscriber Identification)
CIG (Calling Subscriber Identification)
b) Registration of sender ID
c) Registration of telephone number for the call-back message
3. Dial parameter programming
Parenthesis means setting variation. Default table is shown in Table 4-8.
Operation: The programming operation is described in Fig. 4-3-19 (1/4 - 4/4).
Note: Some items from (a) to (n) are available according to PTT's
estriction.