Filter
Top Products
40672201TX Rev.4
4 - 84
Fig. 4-3-11 Polling TX/RX Programming
SELECT FUNCTION (OT)
MEMORY AVAIL.= 100%
BULLETIN POLL
YES(←) NO(→)
PERSONAL BOX NO. [ ]
ENTER 0-8
PERSONAL BOX NO. [2]
YES(←) NO(→)
ILLEGAL OPERATION
PROGRAMMING
SEND SCANED PAGES?
YES(←) NO(→)
OVER WRITE
YES(←) NO(→)
MEMORY OVERFLOW:FAX
REFER TO USER GUIDE
MEMORY AVAIL.= 90%
SCANNING 01
LOAD DOCUMENT
14:14 FAX
WAITING TO BE POLL
NO.=< MAIL BOX NO. >
NO.=_
NO.=01_
POLLING RX
SELECT LOCATION
MEMORY POLL
YES(←) NO(→)
MEMORY AVAIL.= 90%
SCANNING 01
14:14 FAX
WAITING TO BE POLL
Press OT5 key.
Press START key.
When image memory is running
out or transaction is full.
When image memory
is running out or
transaction is full.
When the machine is already
in the Bulletin POLL waiting state.
When the machine is already
in the Bulletin POLL waiting state.
When is input 0 in the Box No.
and exists in the memory polling
TX waiting state.
Press START key.
After 3 seconds
After 3 seconds
After 5 seconds elapsed
After 3 seconds
After 3 secondsFlash memory
programming
Go to standby
Memory reading ended
Feeder Polling TX
waiting state
MEMORY OVERFLOW
When BOX No. is opened
as confidential.
When BOX No.
is not opened.
When BOX No. is
opened and the
image memory
is registered.
Memory over flow
Memory over flow
Memory reading ended
0, 1
3 SEC
MAX 20 DIGITS
(0~9, spare, *, #)
Press START key.
No document
DIS BIT32=OFF
DIS BIT32=OFF
Document
No document
2
← key
← key
← key
→ key
→ key
→ key
1
2
3
1
4
4
3
32
<PERSONAL BOX No.>
0 : Bulletin POLL
1~8 : Mail Box Bulletin POLL (Bulletin board)
Operator can select No. 0~8 for Box No., even
DIS BIT32 set to OFF.
*1)
*1) Shifting automatically to the following
processing according to MEM FULL SAVE
setting after 59 seconds timeout.