Filter
Top Products
40672201TX Rev.4
4 - 16
Manual Dialing (External Telephone)
It is assumed that the operator dials the telephone number by using the
dialing facility provided on the telephone unit. This operation is indicated by
the rightmost in Fig. 4-1-1.
Since the machine is not involved in this dialing operation, the message on
the LCD will remain unchanged, that is Time.
When the operator completes dialing, the exchange will establish connec-
tion with the called station through PSTN (Public Switched Telephone
Network). Assuming the call is answered, the operator will hear CED tone
from the distant station and taps START key in a similar fashion as men-
tioned for Local Keypad Dialing.
Pressing START causes the machine to switch the line connection to the
facsimile facility, and proceeds to transmit message. The message on LCD
is now changed to:
MANUAL TX START
The machine proceeds to send massage which corresponds to the
"MANUAL SEND MODE" block, also shown the rightmost in Fig. 4-1-1.
One-Touch Auto Dialing
It is assumed that the telephone number "00116097784184" had been
assigned to One-Touch No. 1 in advance. The handset is assumed to be
on hook.
The operator taps One-Touch No. 1 on the Operation Panel. This operation
is indicated by the leftmost in Fig. 4-1-1.
The machine immediately responds to the operator's action and the LCD
will display the entire preprogramed telephone number corresponding to
One-Touch No. 1 with a guidance message:
OKI TAKASAKI
YES(START) NO(LOC.)
The message corresponds to " " shown in Fig. 4-4-6, because "AUTO
START" is disabled and the call is originated on hook.