Filter
Top Products
40672201TX Rev.4
4 - 48
4.6.10 Broadcast entry report
Format : See Fig. 4-5-9.
Purpose : To allow the operator to obtain a list of entered locations for the broadcast.
Descriptions : 1. Title of the report
2. Date and time when the report was printed
3. Sender ID
4. Session number
5. Specified transmission time
6. Reserved transmission address (One-touch dial)
7. Registered location ID (One-touch dial)
8. Reserved transmission address (2 digit auto dial)
9. Registered location ID (2 digit auto dial)
10. Reserved transmission address (Ten key dial)
Five locations are available.
4.6.11 Confidential RX report
Format : See Fig. 4-5-12.
Purpose : To inform the operator about a stored confidential message in the memory.
4.6.12 Power OFF report
Format : See Fig. 4-5-11.
Purpose : To indicate AC power failure and recovery and in case of destruction of accu-
mulated picture data in Memory. The information printed on the Power OFF
report is not printed out on the Activity report.
Method : The report will be automatically printed out when the AC power is restored.