Filter
Top Products
40672201TX Rev.4
4 - 19
When the machine has completed dialing, the message on the LCD would
change to:
001160977484184
CALLING
The machine proceeds to send the message which is identified by the
"KEYPAD DIAL" block shown in Fig. 4-1-1.
Destination ID search dialing
Any registered destination ID can be searched and direct dialing to the
destination, having the searched ID, is possible. Searching by entering the
all characters of the destination ID is possible, and searching through all
destination IDs is also possible.
(Operation)
The operation explained below as an example is for the search of the
destination ID, "OKI-TOKYO".
(1) Manual search dialing mode
Press the SEARCH key. As the first character is O, press 6 on the key
pad. Since M, N and O are assigned to the 6 key, the LCD displays a
destination ID beginning with M and its dial number as follows:
MINESOTA OFFICE
987654321
As the 6 key is pressed repeatedly, the LCD will display.
OKI-TOKYO
814542111
Pressing the START key in this state causes direct dialing to that
destination.
(2) Auto search dialing mode
Press the SEARCH key twice. As the SEARCH key is pressed repeat-
edly from this state, the LCD will display the destination ID's in the
lexicographical order one at a time, each time the SEARCH key is
pressed as follows: