Filter
Top Products
40672201TX Rev.4
10 - 1
G3
Basic
Procedure
Time
Image
Time
FX-051
Initial 12.0 sec.(V17/29)
Intermediate 2.5 sec.(V17/29)
Final 4.0 sec.(V17/29)
14400 Standard 8.0 sec.
Fine 11.0 sec.
10. OVERALL PERFORMANCE
10.1 Mean Time Between Failures (MTBF)
The MTBF for the overall machine will exceed (3,000) hours of actual operation. The MTBF
will be measurable at a confidence level of 95 percent under controlled laboratory conditions.
The MTBF will be based on 50 percent transmit and 50 percent receive activity.
10.2 Standardization
The machine will meet all specifications established by the 1996 version of ITU-T
recommendation, as follows:
Recommendation T.4 - Group 3
Recommendation T.30 - Procedures
10.3 Image Transmission Time
The time required to send a “ITU-T No. 1 Test Chart” from the machine to another Group 3
facsimile machine or between FX-051 machines, will not exceed the values listed in Table 10-
1.
Table 10-1
* In the case of auto answer. Measured from the time of Answer.
In the case of another chart being applied, the above specified times will not be applied.
Note: The above table shows the values under the following conditions:
• Sender ID: ON
• Speed protocol: OFF
• Feeder TX mode