Filter
Top Products
40672201TX Rev.4
4 - 38
4.5.2 Technical functions
Parentheses means setting variation. Default table is shown in Table 4-7.
Operation : The operation is shown in Fig. 4-3-4.
01. Service Bit (ON/OFF)
Switching serviceman/user operation where there is a difference between U.S. and FTZ
version, as in TSI/CSI registration for example.
ON : Serviceman's features are available.
OFF : Serviceman's features are not available.
02. Monitor Control (ON/OFF)
Enable/Disable of Monitor.
03. Country Code (USA, INT, GBR, IRL, NOR, SWE, FIN, DEN, GER, HUN, TCH, POL,
SUI, AUT, BEL, HOL, FRE, ESP, ITA, GRE, AUS, NZL, SIN, HNG, POR)
Selection of country.
04. Time/Date Print (OFF/ONCE/ALL)
When select to
OFF : Time and Date are not printed.
Once: Time and Date are printed at the top of the first page only.
All : Time and Date are printed at the top of every page.
05. TSI Print (ON/OFF)
To enable or disable TSI print.
When TSI print is on, the telephone number of the fax machine sending you a fax
message is printed at the top of the each page of the message.
06. TAD Mode (OFF/TYPE1/TYPE2/TYPE3)
Switching of valid or invalid for TAD mode function.
TYPE1 : Machine responds as fax even if CNG was not detected.
TYPE2 : Machine responds as fax only when CNG is detected.
TYPE3 : Machine responds as fax after a certain time (15 sec.) elapses. (CNG is not
detected.)
07. Real Time Dial (OFF/TYPE1/TYPE2)
Selection of real time dialing and the ability to enable or disable this feature.
TYPE1 : Real time dialing is available when the optional hand set is OFF-HOOK.