Filter
Top Products
40672201TX Rev.4
4 - 7
Display: A message to indicate the redial state will show up on LCD display.
4.2.9 STOP
Function: When STOP key is pressed twice within 3 seconds during message transmis-
sion, the machine will immediately stop the operation. The half-fed document to
the stacker will come to a halt. To remove the document, open the Control
panel cover upward.
When STOP key is pressed during message reception or during clearing of flash
memory (PROGRAMMING is displayed on LCD) or during pre-feeding, the
machine will not stop the reception. The machine ignores STOP key operation.
Cancellation During TX
Press STOP key twice within 3 seconds to cancel a current session's transmis-
sion.
If the machine is in waiting state of multi-session of transmission or broadcast
transmission, WAITING is displayed on the bottom row of the LCD, the STOP is
pressed one time to go to normal memory cancellation procedure. Refer to Fig.
4-4-7.
Operator can select the session(s) to be canceled in the procedure.
Message STOP is printed in result column on the message confirmation report
(MCF).
Cancellation During RX
Cancellation of memory reception data when STOP key is pressed while re-
corded paper is discharging during memory reception or confidential reception.
When STOP key is pressed during local copying operation, the machine will
stop the copying operation after printing out current page. To remove the
document, open the control panel cover upward, and remove the paper fed half-
way. The recorded paper is automatically discharged.
Another function of this switch is to allow the operator or service man to termi-
nate any key programming operation. All data entered by that time of the
particular programming will be made invalid.
While you are programming, pressing STOP takes you back step-by-step
through the programming functions you have already selected.
Display: Refer to fig. 4-4-8 for the stop key operation.