Filter
Top Products
40672201TX Rev.4
4 - 57
4.9.2 TX preparation and dual access
For the patterns of Dual Access and the description of the Dual Access, refer to Table 4-5
Dual Access Combination Table and Fig. 4-4-16 TX Preparation and Dual Access.
Reception is available during printing from the memory reception.
Reception is available during scanning the document into the memory.
Memory reception is available during printing from memory reception.
Copy is available during memory TX.
Memory RX is available during copy.
4.9.3 TR Latch Current
This switch purpose is the same as PN232 printer for FX-051.
To add adjustable function for transfer roller.
4.10 Point of difference for FX-048
4.10.1 Deleting BROADCAST/FEEDER selection
4.10.2 Instant Dialling
Starting the reading of documents upon call origination after assigning the destination.
Shortening the time up to the reading finished by starting the reading upon call origination.
(Refer to 4-20 Document reading timing)
Reading timing of conventional machines (FX-048 series) was shown as follows:
When FEEDER setting: Starting the reading after shifting to Phase C
When MEMORY setting: Starting call origination after all the documents are read in the
memory
4.10.3 MEMORY FILES REPORT added
Printing the list of received but not printed yet documents and waiting documents for transmis-
sion stored in the memory. (Refer to Fig. 4-5-4)
4.10.4 RESTRICTED ACCESS function added
Restricted Access limits accessible users by setting a password beforehand. Inputting the
password then enables the user's access to the machine (FAX terminal).
(Refer to Fig. 4-3-1, Fig. 4-3-24, 4.4.7.8)
4.10.5 PC Loading added
PC Loading automatically rewrites the program stored in the machine by using PC. This
function is only for serviceman. (Refer to Fig. 4-3-2)