Filter
Top Products
40672201TX Rev.4
4 - 54
To generate a cleaning page on the FX048 series, press the SELECT FUNCTION key once
then press OT10 key and NO key twice. LCD display shows PRINTER CLEANING, then
press YES key and PRINTER CLEANING EXECUTING is displayed. Machine will return to
stand by mode after the cleaning procedure. Refer to Fig. 4-3-24 and Fig. 4-3-27.
4.8.11 Image in MCF
To enable or disable the message in MCF setting.
This is printed at the bottom of the message confirmation report and can help operator to
inform which document transmit
User can set to off the IMAGE IN MCF when user does not want to disclose the sending data
to other people.
4.8.12 Distinctive Ring
Distinctive ringing is a service offered by telephone carriers that allow you
to have several different numbers on one line, each with its own distinctive ring.
In this way, when you get an incoming call, you can identify what number is
being called by the ring pattern.
(Your local telephone carrier can provide you with more information about this
service. This service is usually offered as a monthly charge to your normal phone bill).
By this setting, your fax machine has a distinctive ringing function that allows you to register
one additional distinctive ring pattern.
Then, you can change or cancel the distinctive ring setting anytime.
Learning the ring pattern for automatic answering is available. Default setting is OFF.
4.8.13 Error Criterion Value
To select the scatter error (error criterion) ratio to determine the RTN response at the time of
reception to meet the PTT approval.
This is error decision value for the reception in non-ECM mode.
Machine will respond RTN instead of MCF for the post command.
Refer to Table 4-7.
4.8.14 DIS BIT 32
To select on/off to apply to PTT approval.
To improve compatibility between this machine and other company’s machines. Refer to
Fig.4-3-4-2/3 and Table 4-6-1/2.
Reception of extra fine, 14.4K bps and SEP/SUB function are not available for the other
company’s machines when this setting is OFF.