Filter
Top Products
40672201TX Rev.4
4 - 9
4.2.12 One-Touch Keys
Function: One touch keys are used for following purposes.
• single destination designation
• various functions for communication or registration
a) Single destination designation
When used for single destination designation, pressing each key causes the
origination of a call to preregistered destination telephone number.
Following data registration is available for the single destination designa-
tion.
Key number 1-10
• destination telephone numbers
• ID
• alternate destination telephone number
b) Various functions for communication or registration
Operator can select the various functions directly by using one touch key
after pressing SELECT FUNCTION key. "SELECT FUNCTION (OT)" is
displayed on LCD when one touch key can be used for various
preprogramed functions.
SELECT FUNCTION (OT)
MEMORY AVAIL.= 100%
example
These assigned various functions are shown in Fig. 4-3-1 and Fig. 3-7 ~
Fig. 3-9 control panel.
Display: When pressed to dial select the distant station, the full-digit telephone number
corresponding to the auto dial code assigned to the pressed key will show up on
LCD display.
4.2.13 HYPHEN
Function: This key has two functions.
1) Used as the "+" input key in registering TSI/CSI or Call Back Message.
2) Used as the "-" input key in registering One-touch/Auto dial Tel No. or ID to
switch the PTT parameters.