Filter
Top Products
40672201TX Rev.4
4 - 41
30. NSF Switch (ON/OFF)
NSF signal transmitting selectable.
31. ID/TSI Priority (ID/TSI)
Selects ID/TSI printing in the distant station ID column of the report.
32. Toner Counter Clear (ON/OFF)
Selects whether this function of toner counter clear operating is permitted for user or not.
33. Parallel Pickup (ON/OFF)
Selects the effective/invalid of the parallel pickup function.
4.5.3 PTT Parameter
Default table is shown in Table 4-8. Note : this table is typical value.
Operation: The programming operation is described in Fig. 4-3-1, 4-3-2 and
4-3-6.
a) PTT parameter (Country code)
4.5.4 System reset
Function : To clear or initialize the following data:
1. All data
2. Location data
3. Configuration data
Operation : The operation is shown in Fig. 4-3-1, 4-3-2, 4-3-5.
4.5.5 Default type set
This function is distination countries setting. When changing this setting, all data is initialized
except the counter value.
4.5.6 PC-Loading
This function is possible to rewrite the Flash memory.
[INT]
[HUN]
[POR]
[HNG]
[GBR]
[TCH]
[ESP]
[IRL]
[POL]
[ITA]
[NOR]
[SUI]
[GRE]
[SWE]
[AUT]
[AUS]
[FIN]
[BEL]
[NZL]
[DEN]
[HOL]
[SIN]
[GER]
[FRE]
[LTA]
[MEX]
[USA]