Filter
Top Products
40672201TX Rev.4
2 - 15
47) Broadcast entry report (confirmation purpose)
For broadcast, each destination address and entry time etc. (immediate or delayed), is
available for printing by manual control, only during programming prior to the
communication.
48) Transmission error report
The destination address, error status and total number of pages etc, are printed out
when a communication error takes place.
49) Confidential RX report
This report is printed out when the confidential RX message is received.
50) Speed scanning
This function is automatically activated to reduce the operation time during scanning.
51) TAD mode (For external telephone answering device)
This function switches an automatic voice message response to the calling station.
When TAD does not answer the RI signal from the line, or the machine cannot detect
the OFF-HOOK state, though the machine is set to the state of TAD mode, the
machine can automatic answer according to the value of T/F Timer PRG. (User's
setting No. 10).
(Refer to Fig. 4-4-12)
The machine has 4 types (OFF/TYPE1/TYPE2/TYPE3) of settings in SERVICEMAN
SETTING with regard to TAD mode.
OFF setting means that the machine does not have TAD MODE function.
TYPE1 means ... 1. RING comes.
2. The TAD makes answering, returns the recorded voice
message in TAD for calling party.
3. The FAX machine will examine to detect CNG signal while
TAD works.
4. If the FAX machine detects CNG signal or Remote Receive
No., the machine will go into normal receiving mode.
5. Even though the FAX machine does not detect CNG signal ,
the FAX machine will go to receiving mode in hook-on
condition.
TYPE1 is the same as OKIFAX1000 series.