Filter
Top Products
40672201TX Rev.4
4 - 26
4.4.5.4 Phone Directory
Function: The function allows the operator to print out the Phone Directory report
manually. A brief description of "Phone Directory Report" will be given in
Section 4.6 Reports and Lists.
Operation: The operation is shown in Fig. 4-3-1 and 4-3-12.
4.4.5.5 Configuration Report
Function: The function allows the operator to print out the configuration report manually.
A brief description of "Configuration Report" will be given in Section 4.6
Reports and Lists.
Operation: The operation is shown in Fig. 4-3-1 and 4-3-12.
4.4.5.6 Service Default Report (Configuration Report Service-Bit=ON)
Function: The function allows the operator to print out the service default report manu-
ally for maintenance purpose. A brief description of "Service Default Report"
will be given in Section 4.6 Reports and Lists.
Operation: The operation is shown in Fig. 4-3-1 and 4-3-12.
4.4.5.7 Protocol Dump List
Function: The function allows the operator to print out the protocol dump list manually.
A brief description of "Protocol Dump List" will be given in section 4.6 Reports
and Lists.
Operation: The operation is shown in Fig. 4-3-1 and 4-3-12.
4.4.5.8 Log Report
Function: The function allows the operator to print out the log report manually when
Service-Bit=ON. This information is used by Okidata.
Operation: The operation is shown in Fig. 4-3-1 and 4-3-12.
4.4.6 Selection of Counter Display
4.4.6.1 Drum Counter Display
Function: When I/D unit reaches run-out time, "CHANGE DRUM SOON" is appeared in
LCD. Under above condition, user can see the Drum message and clear.
However, No. of counter is not shown for user (Service-Bit=OFF)
After user changed the Drum and clear operation, "CHANGE DRUM SOON" in
LCD is disappeared.
However, the drum counter clear is possible even if the drum is not at the end
of its lifespan.