Filter
Top Products
40672201TX Rev.4
4 - 29
4.4.7.4 Function Programming
Default table is shown in Table 4-6.
Operation: The operation is shown in Fig. 4-3-1, 4-3-17 and 4-3-18.
01: Default arrangement for message confirmation report (Single location) (ON/OFF)
Function: To enable or disable the automatic message confirmation printout after a
single location call.
Operation: The operation for setting of default position is described in Figure 4-3-17
and 4-3-18.
02: Default arrangement for message confirmation report (Multiple location) (ON/OFF)
Function: To enable or disable the automatic printout of the multiple polling recep-
tion and the broadcast.
Operation: The operation for setting of default position is described in Figures 4-3-17
and 4-3-18.
03: Default arrangement for error report MCF (ON/OFF)
Function: To enable or disable the automatic printout of the error report when error
in communication is detected.
Operation: The operation for setting of default position is described in Fig. 4-3-17 and
4-3-18.
04: Default arrangement for image in MCF (ON/OFF)
Function: To enable or disable the image in MCF.
Operation: The operation for setting of default position is described in Figure 4-3-17
and 4-3-18. Refer to 4.9.7 Image in MCF.
05: Default arrangement for sender ID (ON/OFF)
Function: To enable or disable the sender ID.
Operation: The operation for setting of default position is described in Figure 4-3-17
and 4-3-18.
06: Monitor volume selection (H/L/OFF)